Call To Action

In a bid to create more awareness around COVID-19 Government has called on all .za domain name holders that have an associated website to create a landing page with a visible link to www.sacoronavirus.co.za. For more details see section 5.1.4 of Regulation No. 43164 published on 26 March 2020.

Create Domain

The following section outlines the format of the EPP Domain Create request. The purpose of the Domain Create request is to register the domain so it is published in the zone and active for use.


Table of Contents

1.
Performing the Domain Create Request
2. Possible Responses
  2.1. 1000: Domain Creation Successful
  2.2. 2302: Domain or Subordinate Nameserver Duplication
  2.3. 2303: Associated Contact Errors
  2.4. 2306: Policy Restriction Errors


EPP Domain Create


Notes

1. The ZACR makes use of the <domain:hostAttr> elements for the creation of domains.

2. When creating a domain with subordinate hosts, the IP address must be specified for the nameservers in the <domain:hostAttr ip='v4'> (or v6) element. IPv4 and IVP6 are supported.

3. When creating a domain with delegated hosts the IP address in not required as the IP address has already been  specified on creation of the parent domain.

4. Multiple IPv4 and IPv6 addresses may be specified by duplicating the <domain:hostAttr ip=''> element for each nameserver.

5. The <domain:contact type=''> element must be present 3 times and contacts associated for Billing, Technical and Admin. An OPTIONAL "reseller" contact may be specified.

6. A <domain:pw> must be specified. This password will be used for transfers.

7. The <domain:period> element may be specified with the required registration period of up to 10 years. If it is not, the registry will default to a 1 year registration. This will set the renewal period to the specified value in the element.


 <epp:epp xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
  <epp:command>
    <epp:create>
      <domain:create xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"
xsi:schemaLocation="urn:ietf:params:xml:ns:domain-1.0 domain-1.0.xsd">
        <domain:name>exampledomain.gtld</domain:name>
        <domain:period unit="y">1</domain:period>
        <domain:ns>
            <domain:hostAttr>
                <domain:hostName>ns1.exampledomain.gtld</domain:hostName>
                 <domain:hostAddr ip="v4">x.x.x.x</domain:hostAddr>
                 <domain:hostAddr ip="v4">y.y.y.y</domain:hostAddr>
                 <domain:hostAddr ip="v6">ff02::1</domain:hostAddr>
            </domain:hostAttr>
            <domain:hostAttr>
                <domain:hostName>ns1.otherdomain.gtld</domain:hostName>
            </domain:hostAttr>
        </domain:ns>
        <domain:registrant>RegistrantID</domain:registrant>
        <domain:contact type="admin">AdminID</domain:contact>
        <domain:contact type="tech">TechID</domain:contact>
        <domain:contact type="billing">BillingID</domain:contact><
        domain:contact type="reseller">ResellerID</domain:contact>
        <domain:authInfo>
          <domain:pw>TransferPassword</domain:pw>
        </domain:authInfo>
      </domain:create>
        </epp:create>
  </epp:command>
</epp:epp>

 

Possible Responses


The following are possible responses from our server.

1000: Domain Creation Successful

A response code of 1000 means that the domain has been successfully created and entered into the registry database.

<epp:epp xmlns:epp="urn:ietf:params:xml:ns:epp-1.0">
  <epp:response>
    <epp:result code="1000">
      <epp:msg>Domain Creation Successful</epp:msg>
    </epp:result>
    <epp:resData>
      <domain:creData xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
        <domain:name>exampledomain.gtld</domain:name>
        <domain:crDate>2010-01-01T04:41:55Z</domain:crDate>
        <domain:exDate>2011-01-01T04:41:55Z</domain:exDate>
    </domain:creData>
    </epp:resData>
    <epp:trID>
      <epp:svTRID>ZACR-EPP-13EF8E45C1E-5FA29</epp:svTRID>
    </epp:trID>
  </epp:response>
</epp:epp>

 

2302: Domain Exists or Subordinate Nameserver Duplication

A response code of 2302 means that either the domain name specified is already registered in the registry database, or the nameserver(s) specified are being duplicated. The associated messages are as follows:

1. "Domain exists: exampledomain.gtld" means that the domain name is already registered.

2. "Domain 'exampledomain.gtld' exists in a reserved list" means that the domain name is currently reserved and may not be registered.

3. "domain_host object already exists: ERROR" means that 1 or more nameservers that you specified are being duplicated in the request. Please review your request and ensure that nameserver names are unique.

<epp:epp xmlns:epp="urn:ietf:params:xml:ns:epp-1.0">
  <epp:response>
    <epp:result code="2302">
      <epp:msg>MESSAGE AS ABOVE</epp:msg>
    </epp:result>
    <epp:trID>
      <epp:svTRID>ZACR-EPP-13EF8F9993D-58181</epp:svTRID>
    </epp:trID>
  </epp:response>
</epp:epp>

 

2303: Associated Contact Errors

A response code of 2303 means that there was an error in the declaration of the associated contacts. The associated messages are as follows:

1. "Contact 'ContactID' not found" means that one of your declared contacts in either the Registrant, Tech, Billing, Admin or Reseller elements has not been created with the registry. Please perform a Contact Create to create the contact and try again.

2. "Registrar contacts cannot be used as registrants" means that you have declared your registrar ID in the <domain:registrant> element. Please review the request and associate the correct information.

<epp:epp xmlns:epp="urn:ietf:params:xml:ns:epp-1.0">
  <epp:response>
    <epp:result code="2303">
      <epp:msg>MESSAGE AS ABOVE</epp:msg>
    </epp:result>
    <epp:trID>
      <epp:svTRID>ZACR-EPP-13EF8FBCD3E-B13B5</epp:svTRID>
    </epp:trID>
  </epp:response>
</epp:epp>

 

2306: Policy Restriction Errors

A response code of 2306 means that your request does not match the policies for Domain Creation as outlined by the ZACR. The associated messages are as follows:

1. "A minimum of two and a maximum of 10 nameservers are required" means that you have either specified more that 10 (ten) nameservers in the requests, or that you have specified less than 2 (two) nameservers in the request. Please review the request and ensure that a minimum of 2 (two) nameservers are provided, with a maximum of 10 (ten) being provided.

2. "Domain period unit 'm' not supported" means that you have specified the <domain:period> element in your request, with an attribute of "m". Only an attribute of "y" is accepted

3. "Administrative contact required." means that the Domain Create command does not include the declaration of the Administrative Contact ID. The element <domain:contact type="admin"> must be included. This further applied to the Billing Contact and the Technical Contact.

<epp:epp xmlns:epp="urn:ietf:params:xml:ns:epp-1.0">
  <epp:response>
    <epp:result code="2306">
      <epp:msg>MESSAGE AS ABOVE</epp:msg>
    </epp:result>
    <epp:trID>
      <epp:svTRID>ZACR-EPP-13F186E3F49-7F53D</epp:svTRID>
    </epp:trID>
  </epp:response>
</epp:epp>

 

2201: Requestor != Contact Owner ContactID

A response code 2201 means that one of the specified contacts in the Registrant, Billing, Admin, Tech or Reseller contacts have not been created by you. Please ensure that all specified contacts are owned by you before proceeding.

<epp:epp xmlns:epp="urn:ietf:params:xml:ns:epp-1.0">
  <epp:response>
    <epp:result code="2201">
      <epp:msg>Requester != Contact Owner ContactID</epp:msg>
    </epp:result>
    <epp:trID>
      <epp:svTRID>ZACR-EPP-13EF900B2DE-A4677</epp:svTRID>
    </epp:trID>
  </epp:response>
</epp:epp>


2003: Claims Notice Check required

A response code of 2003 means that there is a Prior Right associated with the domain name. This result will only be returned during the Claims Period of General Availability. The Claims Period is a total of 90 days initiated from the start of General Availability.

In order to continue with the registration of the domain, the Claims Period Domain Check command has to be used and the Claims Period Domain Create command has to be used.

All the information on how to handle Claims Period Domain Creates is available HERE.

<epp:epp xmlns:epp="urn:ietf:params:xml:ns:epp-1.0">
  <epp:response>
    <epp:result code="2003">
      <epp:msg>Claims Notice Check required</epp:msg>
    </epp:result>
    <epp:trID>
      <epp:svTRID>ZACR-EPP-14401396381-D29E2</epp:svTRID>
    </epp:trID>
  </epp:response>
</epp:epp>

 

Last update: 16-10-2014 11:50:15

festive season

As the end of the year approaches, please keep in mind the following information to avoid any frustrations over the holiday period.

 

Closure Date:

Our offices will be closed from the 21st of December 2020 and will reopen on the 4th of January 2021. We will have skeleton staff on standby to attend to urgent customer queries.

 

Contact details:
EPP and Legacy Support: support@registry.net.za
EPP and Legacy Accounts: accounts@registry.net.za 
Legal: legal@registry.net.za

 

Happy holidays and let us continue to maintain social distancing as we approach this peak time!

 

ZACR Team

 

Technical Support

All issues and questions relating to the co.za EPP Registry Registrar System must be raised in the Contact/Support pages through the Registrar Portal. This is to ensure that our support department tracks and addresses all issues. Log in to the Registrar Portal and submit a support request online.

 

Registrar Noticeboard

Click here for the latest status updates.

日日摸夜夜添夜夜添无码_最新亚洲中文字幕一区在线_尹人香蕉视频在线观看